Acrylic panel bending machine

By giving heat to a certain area of acrylic.
you can bend acrylic by hand.

1. Turn the heat controller on the product to increase the temperature.

2. Place the acrylic on the heat source in line with the line to be bent.

3. After a certain amount of time, remove the acrylic and hand it over with your hands.

Big Acrylic panel bending machine

MBOLT-BM12

– This machine can be conveniently used to process acrylic panel as in folding into desired shape.

– Previous conventional acrylic panel bending machine is used to equipping straight line shaped heat wire which transfers relatively weak heat and takes long time for bending work. Besides, the heat wire can be easily disconnected.

– However, M-BOLT bending machine uses coil shaped heat wire which transfers sufficiently strong heat. Besides, the lifespan of the heat wire is relatively very long.

– There are five heat wires that can bend the panel various shape at once

– It is equipped with Chiller equipment that increases quality of good.

MBOLT-BM12

Exterior Size 1805mm x 1340mm x 920mm 
Work Range 1100mm x 1750mm 
Voltage 220V 
Maximum Power Consumption 3000W 
Chiller Motor 80L/min

Big Acrylic panel bending machine

MBOLT-M12

– This machine can be conveniently used to process acrylic panel as in folding into desired shape.
– Previous conventional acrylic panel bending machine is used to equipping straight line shaped heat wire which transfers relatively weak heat and takes long time for bending work. Besides, the heat wire can be easily disconnected.
– However, M-BOLT bending machine uses coil shaped heat wire which transfers sufficiently strong heat. Besides, the lifespan of the heat wire is relatively very long.
– The basic size of working capability is up to 1200mm but it can be produced up to 2400mm by order.

MBOLT-M12

Exterior Size 1805mm x 1340mm x 920mm 
Work Range 1100mm x 1750mm 
Voltage 220V 
Maximum Power Consumption 3000W 
Chiller Motor 80L/min

Close Menu
×
×

Cart